Whether you're using a desktop, laptop or Mac, ASUS ProArt Calibration Technology* is a monitor hardware calibration application that offers color accuracy tuning and uniformity compensation to make things easy when it's time to recalibrate your display's uniformity and color consistency.
ASUS ProArt Calibration Technology
* Specifications may vary by model
Color accuracy optimization
ASUS ProArt Calibration lets you optimize color space settings for different content. Besides sRGB, you can create advanced setups comprising of five different color spaces and other customized settings.
Uniformity compensation
Aug 01, 2019. X-Rite i1Display Pro. X-Rite i1Display Pro (which I have already reviewed, so find all the details HERE) consists of two main elements. I1Display Pro: the probe; iProfiler: the software; In essence, and as always trivializing, the process of calibration and profiling works like this: after setting (calibrating) the monitor correctly, the software (in this case iProfiler) displays on the.
ASUS ProArt Calibration gives you 3x3 and 5x5 uniformity compensation matrices to ensure consistent brightness throughout the screen to reduce color shift.
Saved color parameter profiles
The ASUS ProArt Calibration Technology saves all color parameter profiles on the ProArt monitor’s internal scaler IC chip instead of the PC. How to increase melee dmg destiny 2. This lets you connect your monitor to different devices without needing to continuously change existing settings. It also reduces the signal distortion between the IC and the LCD optical spectrum. The color profiles can be easily activated by using the hotkey on the monitor next time without a PC or calibrators.
Compatible with most calibrators
The ASUS ProArt Calibration Technology is also compatible with the top major hardware calibrators such as X-rite i1 Display Pro and Datacolor Spyder 5 series.
Introduction
What the calibration is and why it is absolutely essential for a photographer to have a profiled monitor we have already discussed in the past (for example HERE).
As we have seen, there are various tools for calibrating and profiling the monitor, but in fact the fundamental actors we have to choose are always two: a software and a hardware.
In this quick article we will see how to calibrate and profile your monitor correctly using the combination I prefer for my MacBook Pro: we are talking about the X-Rite i1Display Pro solution
X-Rite i1Display Pro
Adobe error 1500 windows 10. X-Rite i1Display Pro (which I have already reviewed, so find all the details HERE) consists of two main elements:
In essence, and as always trivializing, the process of calibration and profiling works like this: after setting (calibrating) the monitor correctly, the software (in this case iProfiler) displays on the screen patches of different and known tones. On the other hand, our probe (in this case i1Display Pro) receives what the monitor displays and tells the software what it reads. The software at this point goes to describe in a language independent of the display media the behavior of the monitor and creates the mythological ICC profile that basically tells the video card (or the LUT) how much it must “err” to display our images correctly. Simple, isn’t it? Quite the contrary, but as I told you the goal of this article is to allow you to perform calibration rather than get bored with the theory.
So, let’s cut the crap and start!
Monitor preparation
Whether or not it is a latest-generation monitor, there are good practices that should be observed before proceeding with calibration and profiling.
Before you start, clean the monitor! It seems trivial, but dirt or fingerprints at the surface where we’ll place our probe would compromise the profiling.
Once this is done, you should first reset any manual settings you have made to your monitor. If it is your laptop you have hardly acted manually on too many parameters, but especially if you have an external monitor, remember to reset from the OSD menu of the monitor at least brightness and contrast.
If like me you are profiling a Mac, here are some suggested settings to set in System Preferences before you start calibrating: Download turbo c7 for mac.
Another very important thing: before performing the calibration leave the monitor on for at least half an hour: in this way all the components will stabilize thermally, simulating at best the conditions in which we will work later.
https://associationtree243.weebly.com/blog/adobe-cmyk-profile-download-mac. Now we’re ready to calibrate!
1 -Preliminary operations
First, we connect our i1Display Pro probe to the computer and launch the iProfiler software. If everything is connected correctly, i1Display Pro and iProfiler will talk to each other correctly, and we will see this from the recognition of the probe in the main screen
At this point, on the right side of the screen, we go to select the User Mode: Advanced. This will give us more control over the calibration parameters.
Once this is done, in the left column we go to select Display Profiling.
2 – Display Settings (Calibration)
Yes, setting the display means actually going to perform the calibration.
First, let’s specify the panel technology of the screen we want to profile. The software should automatically detect the panel we are using, but if this does not happen or if you have any doubts, you can do it manually from the drop-down menu.
If you have an external photographic screen and you are in doubt as to whether the automatic selection is correct, I suggest you consult the website www.displayspecifications.com/
For my MacBook Pro with retina display, White LED is correctly selected.
Once this is done, let’s select the “White Point“.
Here a world of possibilities opens up, but if the objective is to profile your monitor for post-production photography, the choice I recommend is to opt for the CIE illuminant D65.
About Luminance, I suggest you choose the value of 120 cd/m2: this is the value I normally use when I work on my images. In printing, however, this value would be too high, so for the profiling related to printing, I suggest a value of 100 cd/m2 or even 80 cd/m2. (once again, it depends a lot on the paper you will use).
So how do we do it? Simple! Remember that no one forbids us from making two profiles to be used in each case!
As for the Contrast Ratio, if you are profiling a single monitor and we are always calibrating our monitor for post-production photography, it is difficult not to find reasons not to select “Native“. If, on the other hand, we are calibrating for printing, things get complicated.
To understand what to choose we must first understand what the Contrast Ratio means: it is a property of any display medium and represents the ratio between the maximum luminance and the minimum reproducible luminance. The contrast ratio of a monitor is usually much higher than that of a paper, so when we go to calibrate for the printer is good to select a Contrast Ratio as close as possible to that of the paper. How much? The answer, as always, depends on the paper, unfortunately. It takes a bit of experience, but as values to start trying, I suggest 1:300 for glossy and 1,200 for matt/cotton.
I1 Display Software
Are you wondering if it’s not the same thing as Soft Proof on Photoshop? Yes, roughly, but if you print your photos you will find that there is no Soft Proof that compares with a calibration done well and targeted to your printer!
The last two options you can select are Flare Correct and Ambient Light Smart Control. The first (Flare Correct) measures and compensates for the increase in luminance due to the reflection of light on the monitor screen (Viewing Flare), while the second allows the measurement of ambient light and the relative change in luminance in the profile. Rightly or wrongly (it is a debated topic) I keep both options disabled.
https://wheelsnew369.weebly.com/blog/download-excel-solver-mac-2011. The reason for the choice is that I try to maintain my workstation already with a controlled ambient light, so I do not care about avoiding reflections that are not there, or controlling an ambient light that does not vary.
3 – Profile Settings
After selecting Display Settings, we can move on to the next section of Profile Settings.
The first parameter to be selected is “Chromatic Adaptation“, i.e. the algorithm that will be used to calculate the relative colorimetric intent from the absolute one. Saving you some experimentation, I would suggest you to start choosing the classic Bradford and to change it only if the result is obviously not congruent.
At this point, we have to select the “Profile Version“, which we can select between v2 and v4. Instinctively you will think that the latest version is always better, but as far as I’m concerned it’s not like that. Also, not all systems and applications support it correctly, so without hesitation, I suggest you choose v2.
For the Tone Response Curve, we leave the suggested selection of 2.2.
Finally, we have to select the Profile Type. I suggest you select “Table based” as it is more accurate, though slower to achieve.
4 – Monitor Characterization
At this point we are ready to characterize our monitor, that is to go to perform with our probe a series of measurements that will allow us to create the famous ICC profile of the monitor. https://powerupdive948.weebly.com/blog/mtd-gold-snowblower-manual.
First, we select the “Patch Set“, that is the number of RGB backhoe loaders that will be displayed on the screen by the software and measured by the probe. I suggest you select the Large option that will display 462 patches.
Now select the automatic or manual control mode depending on what your display allows (if possible select “ADC Automatic Display Control“) and move on to make the actual measurement, which depending on the settings previously chosen may take up to twenty minutes.
I1 Display Pro Download Mac High Sierra
To start the measurement, press “Start Measurement“, which is located below the image of the selected patch set.
5 – ICC Profile CreationI1 Display Pro Download Mac Download
Once the measurement phase is complete, we actually characterized our monitor.
I1 Display Pro Download Mac Firewire Driver
We just have to give a name to our ICC profile (useful to enter the date of the day) and click on “Create and save profile” to make it active immediately.
There are actually two settings that we can choose before saving. The first concerns the Profile Distribution. If you are using a Mac, select User Level, and if you are using a PC, select System Level.
I1 Display Pro Download Mac Free
The second setting concerns the recalibration reminder. That’s right, your calibration isn’t eternal, so it’s a good idea to recalibrate your monitor periodically. How often? It’s up to you. I honestly recalibrate anyway before each print session, but otherwise, a reasonable value could be every 3 or 4 weeks.
Conclusions
The X-Rite iProfiler and i1Display Pro Mac os iso download filehippo. combination is a real winner in calibrating and profiling your monitor. The iProfiler software is so intuitive in the advanced calibration and profiling section, and the i1Display Pro probe is really reliable.
I1 Display Pro Review
Of course, like any professional tool requires study and attention when using it to achieve really optimal results, but I am sure that if you have followed these few simple instructions now you will have the opportunity to work on a perfectly calibrated and profiled monitor!
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2020
Categories |